
Ford Motor Company has issued a safety recall for a select group of Ford Bronco Sport SUVs due to a manufacturing defect in the front suspension. Registered under National Highway Traffic Safety Administration campaign number 26V-340 and Ford recall number 26S36, this safety campaign addresses a critical issue where the front lower control arm ball joint can separate from the front wheel knuckle. Because a separation of this nature can lead to a sudden loss of steering control, Ford has issued a strict "Do Not Drive" advisory for all affected vehicles.
Our service team at Paul Thigpen Ford of Waynesboro is fully prepared to assist local owners in identifying whether their vehicle is affected and coordinating the necessary repairs. We understand that a major safety advisory can cause concern, especially for families who rely on their SUVs for daily school runs and commutes. We are committed to handling this recall with absolute transparency, efficiency, and care to ensure your vehicle is returned to a safe, roadworthy condition.
If you own a model year 2021 through 2026 Bronco Sport, it is vital to verify your vehicle's status immediately. For immediate questions or to coordinate your vehicle's care, you can reach our service department by giving us (706) 554-2114 a quick call. If you need to coordinate towing or locate our facility, you can find our dealership directions online to map out our physical location.
Table of Contents
- The Mechanics of the Suspension Defect and the Do-Not-Drive Warning
- Identifying Affected 2026 Bronco Sport SUVs and Checking Your VIN
- The Official Ford Repair Procedure for the Lower Control Arm Ball Joint
- Towing and Loaner Car Logistics for Augusta Area Drivers
- Common Questions About the Bronco Sport Front Suspension Recall
- Protecting Your Bronco Sport with Paul Thigpen Ford of Waynesboro
The Mechanics of the Suspension Defect and the Do-Not-Drive Warning
Why has this specific suspension issue triggered such an urgent warning? The front lower control arm ball joint serves as the pivotal connection point between the vehicle's lower control arm and the front wheel knuckle. This component allows the front wheels to pivot smoothly for steering while absorbing road impacts. According to Ford's defect report, an assembly plant operator may not have fully inserted the front lower control arm ball stud into the front wheel knuckle before securing the pinch bolt on vehicles built before June 1, 2025. For vehicles built on or after that date, certain units requiring an in-plant correction may have left the factory without the repair being completed.
This improper assembly means the ball joint is only partially engaged. Over time, normal driving forces can cause the ball stud to slip completely out of the wheel knuckle. If this separation occurs while the vehicle is in motion, the affected front wheel will pull outward, causing a sudden and severe loss of steering control.
Because this mechanical failure can happen without warning, Ford and federal safety regulators issued the "Do Not Drive" advisory. Unlike wear-and-tear suspension issues that develop gradual clunking noises over several months, an improperly secured pinch bolt can allow sudden separation under normal load, significantly increasing the risk of a crash.
Identifying Affected 2026 Bronco Sport SUVs and Checking Your VIN
Is every Bronco Sport on the road included in this safety campaign? No. Nationally, the recall affects a highly targeted group of 4,653 vehicles, which is split between 2,357 Ford Maverick pickups and 2,296 Ford Bronco Sport SUVs from the 2021 through 2026 model years. The affected Bronco Sport vehicles were assembled between March 11, 2020, and April 28, 2026. Because Ford has produced hundreds of thousands of these SUVs during this timeframe, the vast majority of Bronco Sports on the road are not part of this recall.
To determine if your specific vehicle is affected, you must check its 17-character Vehicle Identification Number (VIN). You can find this unique identifier in the following locations:
- On a metal plate located on the driver-side dashboard, visible through the windshield from the outside.
- Printed on the safety certification label located on the driver-side door jamb.
- Listed on your vehicle's registration card, insurance card, or state title.
Once you have your VIN, you can input it directly into the online recall lookup tools provided by the National Highway Traffic Safety Administration or the official Ford owner portal. If your vehicle is flagged as part of the 26S36 campaign, you must stop driving the vehicle immediately and contact an authorized dealer to arrange for transport and repair.
The Official Ford Repair Procedure for the Lower Control Arm Ball Joint
When an affected SUV is brought into our facility, our factory-trained technicians follow a precise, multi-step inspection and repair protocol mandated by Ford. First, the technician will raise the vehicle and perform a detailed physical inspection of the front lower control arm ball joints on both the driver and passenger sides. They will measure the depth of the ball stud insertion into the front wheel knuckle and inspect the condition of the pinch bolt and surrounding mounting hardware.
If the inspection reveals that the ball stud was not fully seated or that the assembly is compromised, our team will perform the necessary corrective repairs. This process involves loosening the pinch bolt, fully seating the ball stud to its correct depth within the knuckle, and installing a brand-new pinch bolt torqued to exact factory specifications. If any damage is detected on the control arm, ball joint, or wheel knuckle due to the partial engagement, those components will be replaced using original equipment manufacturer parts.
All safety recall inspections and repairs are performed completely free of charge to the vehicle owner. To ensure your vehicle receives the necessary attention from our certified technicians, please schedule a service appointment online. If your vehicle requires replacement suspension components, our department will order genuine Ford parts directly from the manufacturer to guarantee a perfect fit and long-term durability.
Towing and Loaner Car Logistics for Augusta Area Drivers
Because of the strict "Do Not Drive" advisory, owners of affected vehicles should not drive their SUVs to our service department. Driving an affected vehicle, even for a short distance, presents an unnecessary safety risk. To accommodate this, Ford is covering the full cost of professional towing for all vehicles included in this recall. Our service coordinators will help arrange a flatbed tow truck to pick up your Bronco Sport directly from your home or workplace and transport it safely to our service bays.
For commuters traveling from Augusta, we recognize that being without your primary vehicle is a major disruption to your daily routine. Our service department works diligently to minimize this inconvenience. We offer alternative transportation options, including loaner vehicles, depending on our current fleet availability.
When you contact our service advisors to coordinate your recall towing, please let us know if you require a loaner vehicle. We will do everything possible to keep you mobile while our technicians complete the safety inspection and any required suspension repairs on your Bronco Sport.
Common Questions About the Bronco Sport Front Suspension Recall
Q: What are the warning signs of a failing front lower ball joint?
A: A ball joint that is beginning to separate may cause a metallic clunking or knocking noise from the front suspension when driving over bumps or turning the steering wheel. You might also notice excessive steering wheel vibration or a distinct pull to one side. However, because this assembly defect can cause sudden separation without prior warning, you should not wait for symptoms to appear if your VIN is active in the recall.
Q: Can I drive my Bronco Sport to the dealership if I feel no suspension symptoms?
A: No, you should not drive the vehicle at all if it is confirmed to be part of the recall. The partial engagement of the ball joint can fail suddenly under normal driving conditions, leading to an immediate loss of steering control. Ford covers 100% of the towing costs to ensure your vehicle is transported safely to our facility without risk to you or your family.
Q: How long does the recall inspection and repair take?
A: The physical inspection of the front lower control arm ball joints typically takes less than an hour. If our technicians find that the components are properly aligned and torqued, your vehicle can be cleared quickly. If a repair or parts replacement is required, the process will take longer; our service coordinators will provide a precise time estimate when we arrange your vehicle's transport.
Q: Will this suspension repair affect my vehicle's alignment?
A: Yes, any major service or component replacement involving the front lower control arms requires a professional wheel alignment. If our technicians must disassemble or replace suspension parts to resolve the ball joint issue, we will perform a complete four-wheel alignment to ensure your tires wear evenly and your vehicle handles properly. This alignment is included as part of the recall remedy at no cost to you.
Q: What paperwork do I need to bring or provide for the recall service?
A: You do not need to bring any special paperwork, though having your Ford recall notification letter can help speed up the check-in process. Our service advisors can look up your vehicle's entire recall and warranty history using your 17-character VIN. We will provide you with full, official documentation of the inspection and any completed repairs for your personal maintenance records.
Protecting Your Bronco Sport with Paul Thigpen Ford of Waynesboro
At Paul Thigpen Ford of Waynesboro, we are dedicated to keeping your family safe on the road. Whether you are navigating the daily commute or traveling near the Savannah River basin, a properly functioning suspension is critical to your safety. Our factory-trained technicians have the specialized tools, diagnostic equipment, and genuine Ford parts required to resolve this recall quickly and correctly.
If you have confirmed that your vehicle is affected, or if you need assistance running your VIN, please contact our local service team. Do not take unnecessary risks with a "Do Not Drive" advisory. Reach out to our service department by calling (706) 554-2114 to coordinate your complimentary flatbed tow and schedule your safety repair. For those who wish to speak with our team in person or coordinate logistics directly, you can get directions to our dealership online and let our family take care of yours.
© 2026 Paul Thigpen Ford of Waynesboro. All rights reserved.